Alarm
MAXIT and ALARMIT Accessories
Battery Backup Siren
 |
A battery backup siren provides additional protection for your vehicle. If the power is cut to the main system, the battery on the siren takes over until power is lost or the key is turned. The siren has both negative and positive siren triggers. |
|
Compatible with: AlarmIt and MaxIt Systems Only |
 Starting at $29.99* |
|
CompuPack (FT-DM-700)
 |
The CompuPack provides two 30 Amp relays that are prewired to a harness for installation purposes. This system is perfect for positive 12V+ lock and unlock triggers as well as for powering aftermarket actuators. |
|
FT-DAS | 3-in-1 Security Sensor
 |
The FT-DAS sensor gives you 3 different sensors in 1! It will detect unwanted impact to your car, tilt if it is jacked up, and forward movement. This sensor is also remote adjustable and can be set to your preference. |
|
Compatible with: AlarmIt, StartIt, and MaxIt Systems Only. |
||
FT-Shock | Shock Sensor
 |
FT-Shock is included with all Alarm and Alarm/Starter combo units. The FT-Shock is designed to protect your vehicle form unwanted impact. The CompuStar and CompuShock provide either a warn away or full alarm trigger depending on severity of impact. |
|
Compatible with: AlarmIt and MaxIt Systems Only. |
||
Factory Remote Interface
 |
The Factory Remote Interface is used for installation purposes only. It provides a way for the CompuStar to communicate to a factory remote in cases where analog or digital communication is impossible. |
|
Starting at $49.99* |
||
FT-BATT BACKUP | Battery Backup System
 |
This system connects to Firstech series alarms and / or alarm starters. Its used in the event of break into your vehicle. It provides back up battery power to all alarm functions for the duration of the battery's life. |
|
Compatible with: AlarmIt and MaxIt Systems Only |
||
FT-DM600 | Door Lock Harness
 |
The FT-DM600 is used for installation purposes only. When installed, it switches the lock and unlock outputs on the all AlarmIt, StartIt and MaxIt Systems. The harness provides a 600 mA positive 12V+ on the lock and unlock wires. |
|
FT-LED BLUE | Super Bright Blue LED
 |
The FT-LED BLUE provides you with a visual confirmation that your system is armed and locked. It can be installed anywhere in the cabin of your vehicle. | |
FT-RPS TOUCH | Touch Remote Paging Sensor
 |
New from Firstech! The FT-RPS TOUCH is compatible with all AlarmIt and MaxIt Systems. It contains three super blue LEDs that flash while the system is armed. The system will also respond to a double touch that pages your 2 Way remote and lets you know someone is trying to reach you at your vehicle. The FT-RPS TOUCH takes innovation further with a touch unlock feature. Program a 4 digit code that lets you disarm your system without remote and key. Hold your finger on the sensor to also rearm your system. Compatible with: AlarmIt and MaxIt Systems Only. |
|
Starting at $39.99* |
||
FT-RPS 2 | Remote Paging Sensor
 |
The FT-RPS-2 is compatible with all AlarmIt and MaxIt Systems. It contains a super blue LED that flashes while the system is armed. The system will also respond to a double knock that pages the 2 Way remote and lets the user know someone is trying to reach them at their vehicle. The FT-RPS-2 takes innovation further with a knock unlock feature. You can program a 4 digit knock unlock that can disarm your system without a remote and key. |
|
Compatible with: AlarmIt and MaxIt Systems Only |
Starting at $29.99* |
|
FT-VALET GREY | Secure Valet Switch
 |
The FT-VALET GREY is compatible with all AlarmIt, StartIt and MaxIt Systems. The Secure Valet Switch contains a blue LED that also flashes while the system is armed. The Secure Valet Switch gives you the ability to enter a 2 digit code to put your system into valet mode. |
|
Compatible with: AlarmIt, StartIt, and MaxIt Systems Only |
Starting at $29.99* |
|
Remote Paging Sensor
 |
The Remote Paging Sensor is compatible with all CM3 Series 2-Way Alarm and Alarm/Starter units. The RPS contains a blue LED that flashes while the system is armed. The system will also respond to a single knock that pages the 2-Way remote and lets the user know someone is trying to reach them at their vehicle. |
|
Compatible with: CM3 Series Systems Only |
Starting at $19.99* |
|
Siren
 |
This standard 6-tone siren provides audible protection for your vehicle. If the alarm is triggered in any way, the siren will sound for a duration set by your CompuStar Dealer. The volume of chirps can be increased by request at time of install. |
|
Starting at $19.99* |
||
MAXIT and STARTIT Accessories
CompuTrans V.2
 |
The CompuTrans V.2 is used for remote start purposes only. It is used to bypass the factory transponder system on most newer vehicles. Check with your Authorized CompuStar Dealer for more information. |
|
 Starting at $49.99* |
||
FT-TEMP SENSOR
 |
The FT-TEMP SENSOR will read temperature inside the vehicle on the CompuStar systems. The Thermister is intended for 2-Way remote systems that show the temperature (Celsius or Ferenheit) on the LCD screen. This can also be used with remote start systems with 1-Way remotes. You can set temperature thresholds and have it start when it hits the setting. With the Thermister you can check the temperature inside your vehicle and even set you vehicle to remote start when it passes the temperature threshold set by your installer. |
|
Compatible with: AlarmIt, StartIt, and MaxIt Systems Only
|
Starting at $14.99* |
|